- Community
- Makerspace
- Governance
The order of this document is roughly the order you will walk through the woodshop during the training. This orientation assumes that they have gone through our general space orientation.
Do not operate any power equipment if you are under the influence of anything, in a hurry, are tired, or are not feeling well.
Inspect the equipment before using.
Have members demonstrate usage with a test cut, if necessary
Have user demonstrate a test cut
Demonstrate the floor cleanout next to the bandsaw
Have user demonstrate a test pass
Have user demonstrate a test pass
Have user demonstrate a test cut with scrap MDF or plywood
Have user demonstrate a test cut with a scrap 2×4
Remind members that the orientation documents are on the wiki
[ ] Sign authorized member list